INOCON-clamps offering following advantages:
Our clamp connectors form the core of our product range and are initially divided into materials in stainless steel and aluminum components.
The stainless steel clamp connector range now covers the diameters 10-20 mm, 30 mm and 50 mm, which are also suitable as a protected version with seals for special use in the food, pharmaceutical and chemical industries. The article numbers always end with an E = stainless steel, e.g. KNSE, FLKE and so on.
The aluminum clamp connector range is divided into one-piece (closed) clamping pieces with clamping slot and multi-part components consisting of half shells. In addition, the following series are to be distinguished:
The compact series includes diameters 10, 12, 14, 15, 16, 18 mm (20 mm only for stainless steel), e.g. KNK, FLK, FUKE, etc.
The standard series include three diameter ranges:
20, 25, 30 mm - 40, 42, 45, 48, 50 mm - 50, 55, 60 mm, e.g. KNS, FLS, FUS, etc.
The intermediate series with the diameters 30, 32, 35, 40 mm serves as a link to the standard series 20-30 and 40-50 mm, e.g. KNZ, FLZ, WIVZ.
The universal series make it possible to combine two series in one component. This is possible for the diameters 10-18 and 20-30 mm, 20-30 and 40-50 mm as well as 40-50 and 50-60 mm and relates to the cross and in part the angle clamping connectors, e.g. KUS2512, KUS5030, WUU4050.
Furthermore, various surface variants are available for the aluminum clamp connectors.
As standard, the components are offered with slide-grinded or sandblasted surface. In addition, we black powder-coat the pipe connectors (other colors on request) in-house as well as polish or anodize.
The standard version also includes steel galvanized screws and nuts. However, these can be replaced by clamping levers in different variants.
The stainless steel clamp connectors are of course equipped with stainless steel screws and nuts!
Detailed information about the order key and the surface and screw alternatives can be found here.
Of course, the range of clamp connectors includes the matching accessories in the form of precision tubes made of aluminum, steel and stainless steel incl. tube cover caps and adjustable feet.
![]() |
Cross clamp: 90°-connection of tubes with 2 displaced levels of the clamp drillings; also different diameters can be combined:10-30 mm and 20-50 mm as well as a change from round to square tube with the divided construction unit; |
![]() |
Cross-flange 90°-connection of tubes with 2 displaced levels of the clamp drillings clamp: with an additional flange possibility on a mounting face with the divided construction unit; |
![]() |
Flange clamp: Fixing of a tube parallel to a mounting face with 2 or 4 mounting drillings; |
![]() |
Pedestal clamp: Fixing of a tube rectangular to a mounting face with 4 mounting drillings; |
![]() |
Angle clamp: 1 blind hole; also different diameters can be combined: 10-18 mm, 20-30 mm, 30-40 mm, 40-50 mm as well as a change from round to square tube with the divided construction unit; |
![]() |
Angle clamp EVS: |
![]() |
Parallel: Assembly of tubes to a mounting face |
![]() |
Sleeve: Extension of tube cuttings |
![]() |
Pipe saddles: Assembly of tubes to a mounting face |
![]() |
Strap and joint clamps: |
![]() |
Sensor holders: simple and stabile solution, available in the diameters: 12-18 mm and 20-30 mm, in connection with protected wiring within the tube system. |
Construction units of stainless steel clamps:
The dull finished clamps in closed version are available in the construction units cross, flange, pedestal and angle clamp in the diameters 12, 14, 16 and 18 mm. New in our assortment are the diameters 15 and 20 mm for crosses and flanges.
![]() |
Cross: 90°-connection of tubes with 2 displaced levels of the clamp drillings clamp: with an additional flange possibility on a mounting face with the divided construction unit; |
![]() |
Flange: Fixing of a tube parallel to a mounting face with 2 or 4 mounting drillings |
![]() |
Pedestral: Fixing of a tube rectangular to a mounting face with 4 mounting drillings |
![]() |
Angle: 1 blind hole |
![]() |
Tubes: For all clamp diameters we supply the according precision tubes as pre-cut with inside- and outside deburring in the following materials, round and square:
|
![]() |
Adjustment levers: as an alternative to screws you can use adjustable levers (no tools necessary). Therefore the lever is turned into the right clamping position by a serration. The levers are available unpainted or black / orange coated, as well as with steel browned or stainless steel thread. |
![]() |
Tube stoppers ADK: for closing of tube ends (round): |
![]() |
Tube stoppers ADK: for closing of tube ends (angular): |
![]() |
Adjustable feet ADG: The plastic plates are adjustable in heights for levelling and furthermore very flexible applicable by means of a ball joint. They are used to be screwed in tube stoppers ADG. |